ARIDOO Ag5152a 4-inch 6-speed Angle Grinder – 800W, 11, 000 Rpm, 100mm Disc, 5m Cable, Cutting, Grinding & Polishing Kit

Powerful 800W Motor

The ARIDOO AG5152A is equipped with an 800W rated motor with a stated load power of 1000W. Operating from a 220V, 50Hz electrical supply, it provides the power required for a variety of cutting, grinding and surface-finishing applications.

With a no-load speed of up to 11,000 RPM, the grinder is suitable for demanding workshop, fabrication, construction and maintenance work.

6-Speed Variable Control

A 6-speed variable-speed control allows the operator to adjust the grinder's speed to suit different applications and materials. This provides greater flexibility when switching between cutting, grinding, sanding and polishing operations.

The adjustable speed system is particularly useful when a task requires more control than continuous operation at maximum speed.

4-Inch / 100mm Disc Capacity

The grinder is designed for 4-inch (100mm) grinding and cutting accessories. Depending on the correctly selected accessory, it can be configured for metal cutting, grinding, surface preparation, sanding, polishing and other compatible applications.

The supplied kit includes metal cutting discs, a metal grinding disc, wood saw blades, a self-adhesive disc and sandpaper discs.

Metal Cutting & Grinding

For metalworking applications, the grinder can be used for cutting and grinding materials such as steel pipes, metal plates and iron bars when fitted with an appropriate compatible disc.

It is suitable for fabrication, maintenance, repair and general workshop applications where a compact electric grinder is required.

Surface Preparation, Sanding & Polishing

The grinder can also be configured for removing rust, smoothing rough surfaces, sanding and polishing. Its variable-speed control helps provide greater operating flexibility when working on surfaces that require different levels of abrasion or finishing.

Ten sandpaper discs and a self-adhesive disc are supplied as part of the accessory kit.

Stone, Tile & Construction Applications

When fitted with the appropriate compatible cutting accessory, the angle grinder can be used for selected stone, tile and concrete cutting applications. This makes it suitable for renovation, installation and general construction work in addition to conventional metalworking.

Construction & Durability

The tool incorporates a metal head with ventilation outlets to assist heat dissipation during operation. A thickened protective cover helps shield the working area, while the reinforced auxiliary handle provides an additional gripping point for improved handling and control.

The grinder also features a spindle lock to simplify accessory changes and externally accessible carbon brushes for easier routine maintenance.

5-Metre Working Reach

The supplied 5-metre extension cord provides additional working range, which is useful in workshops, construction areas and other locations where the nearest power outlet may not be immediately beside the work area.

Suitable Applications

The ARIDOO AG5152A angle grinder is suitable for a broad range of applications, including:

• Metal cutting and grinding
• Rust and surface material removal
• Sanding and surface preparation
• Polishing applications
• Steel pipe, plate and bar work
• Tile, stone and concrete cutting with an appropriate compatible disc
• Woodworking with the appropriate supplied accessory
• Metal fabrication and workshop work
• Construction and renovation projects
• Equipment maintenance and repair
• Home and DIY projects

Key Features

• 800W rated motor power
• 1000W stated load power
• 220V, 50Hz rated electrical supply
• 4-inch / 100mm grinding and cutting disc size
• Up to 11,000 RPM no-load speed
• 6-speed variable-speed adjustment
• Suitable for cutting, grinding, sanding and polishing
• Metal gear head construction
• Ventilation outlet for motor heat dissipation
• Thickened protective safety cover
• Reinforced auxiliary/support handle
• Spindle lock for easier accessory changes
• Externally accessible carbon brushes for maintenance
• 5-metre extension cord supplied
• Includes metal cutting and grinding discs
• Includes woodworking blades
• Includes self-adhesive disc and 10 sandpaper discs
• Suitable for workshop, construction, fabrication, maintenance and DIY applications

Technical Specifications

Brand: ARIDOO Model: AG5152A Product Type: Corded Angle Grinder Rated Power: 800W Load Power: 1000W Rated Voltage: 220V Frequency: 50Hz Disc Diameter: 4 inch / 100mm No-Load Speed: 11,000 RPM Speed Control: 6-speed variable control Power Source: Corded electric Extension Cable Length: 5m Main Material: Steel Weight: 3kg Applications: Cutting, grinding, sanding, polishing, surface preparation, metalworking, woodworking, renovation and workshop applications

What's in the Box

• 1 × ARIDOO AG5152A angle grinder main unit
• 1 × 5m extension cord
• 1 × Support/auxiliary handle
• 1 × Wrench
• 1 × Protective safety cover
• 2 × Pressure plates
• 2 × Carbon brushes
• 2 × Metal cutting discs
• 1 × Metal grinding disc
• 2 × Wood saw blades
• 1 × Self-adhesive disc
• 10 × Sandpaper discs